With the decision of the Energy Market Regulatory Board on 27.12.2012 and numbered 4208-19,
Articles 1.4 and 1.5 of the "Minimum Technical Specifications of Meters, Communication Equipment and Additional Equipment and Infrastructure to Be Included in OSOS Scope to Be Established by Distribution Companies" have been amended as of the following, dated 20/10/2011 and approved by Board Resolution 3465/100.
"1.4.As of 01.01.2013, the counters that will be included in the distribution company's OSOS system must be able to record front cover and lemens cover opening interventions, even if the energy is cut off, allowing this information to be read via communication equipment (in addition, the number of magnetic field -magnet- interventions and the last 10 recordings of start/end dates and times must be provided. However, after the completion of the necessary technical studies and technical documents, the counters to be included in the OSOS system, valid no later than one year later, must provide these magnetic field intervention records.).
1.5.Counters must have load profileing, load profile should be able to do within periods of 15, 30, 60 minutes, load profile measurement periods should be remotely adjustable.As of 01.07.2013, the counters that will be included in the distribution company's OSOS system should be able to store load profiles containing measurements every 15 minutes for at least 90 days in memory."
Although many issues have been clarified in the previously published decision,
To make the necessary arrangements if required by the Board
Retail Companies and Distribution Companies
the Board continues to work here as a guide, but in an important study it is waiting for Retail Companies and Distribution Companies.
Currently produced counters meet the requirements of article 1.5 in general, and with today's technologies, it is now easier to get data remotely from the counters. The most important strategy here is the selection, frequency and integration of the data to be taken.
In order to keep the system alive and to run efficiently, it is important to determine what information to use by parsing information that is far from information pollution, informatic and functional.
The information on opening the counter klemens cover in article 1.4 must be designed by the companies to use time and labor efficiently in order to control the data that does not match the work order, in accordance with the work orders of the Relevant Company, which would mean interference with the count.
Otherwise, arranging an on/cut order from the counter for a subscriber and using more labor and time to control the data opened the entire counter cover without researching the warning that the counter klemens cover was opened on the same day and time that the operation took place.
In addition, if the information that was opened on the counter cover is requested from the point of view of the control, then it is possible to prevent the correct recording of consumption by interfering with the Current Transformers without opening the counter cover in The Current Transformer subscribers, so it is possible to use this possibility while the information of opening the dashboard cover where the measurement system is maintained can be obtained with the same remote reading system, even if desired, the system should be used as a message to mobile devices.
In addition, especially
Quality Management System for Companies
responsibilities and solutions can be solved more easily by efficient use of other substances of this regulation.
It should also be done to share the data with users and subscribers, and to work out how to share the information that is decided to be shared in certain time zones if it is used.
Last Word: Investment in information brings the highest profit. Benjamin Franklin