Why Smart Network System? Like the technical definitions entered into the literature in the electrical energy sector, there have been accepted "loss/leakage" patterns in electricity distribution services, but these definitions have remained a little more superficial and generally in place to express clear situations in general.
Although companies make their assessments on total volume; to create a strategy and gain faster mobility against potential risks, they can control their own operations at a more micro-level by parsing leaks and losses instead of leakage/loss.
Why Smart Network System? Here's the Answer
To do this; a smart grid system is needed. This is only possible with serious automation because the network is alive and needs to be updated continuously. Then you can have detailed information about the network and its equipment; With this information, it will be possible to approximate the technical losses in the task area by using the TKK (Lost Coefficient of Transformers) and HKK (Line Loss Coefficients) methods of Transformers published by EPDK (Energy Market Regulatory Board).
On the one hand, the amounts of loss and leakage can be separated; on the other hand, the so-called zero-loss (measured through the bar in the transmission system is in customer consumption due to the line losses of the customers,
In addition, if you want to use Considering that the subscriber fed from the detached transformer added to the invoice by increasing the active and reactive energy consumption in the billing period to not more than 3.5% if the measurement is done on the low voltage side (0.4 kV),
However, if it is found that consumption is made below the one-month losses on the label from the transformer, which is under idle voltage; the difference between active and reactive losses on the label and active and reactive consumption on the counter will be billed separately as transformer loss,
After the closest amount of technical loss to the truth is revealed, it is the possibility to separate the leak/loss data in the mission area and have the information of leakage and loss separately.
Accrual/collection rates are also based on amount, by invoice number; collections must also be carefully examined.
As for non-technical (illegal) losses;
We can generally describe them as consumptions that cannot be accurately metered, including,
– Unauthorized network connections,
– Interference with measuring devices,
– Incompatible measuring circuits,
– Incorrect connections,
and it is the duties of retail retailers to take them to the lowest possible level as soon as possible.
In short, it is not possible to achieve success after operating the system according to its rules.